| Product -> AquaGard |
AquaGard 3005G |
||
| Application: Zero halogen FR compound for non-woven and woven PP fiber. | ||
| Active Ingredients: Proprietary multi component system. | ||
| Carrier: Polyethylene (s). | ||
| Active Content: 30 wt.% | ||
| Physiology: The raw materials used comply with NFPA 701 fire and smoke regulations. | ||
| Physical Form: White pellets | ||
Technical Data:
|
||
| Decomposition, Initial: Approximately 300° C. | ||
| Processing: Below 230° C to achieve optimum flame retardant performance. | ||
| Flexural Modulus, Mpa (PSI): 10 (1450) | ||
| Elongation, %: 120±10 | ||
| Specific Gravity: 1.05 to 1.1 | ||
| Shore - D Hardness: 40±2 | ||
Recommended
Processing Condition: |
||
| Fiber extrusion | Avoid processing beyond 250° C melt temperature. |
AquaGard 3005G can be blended into other PP resins in the ratio of 1:3 (i.e. 1 part 3005G and 3 parts PP). This ratio will impart flame retardancy, increased impact, and improved elongation. |
The processing conditions for each application is only a recommendation based on our years of experience. The optimum processing parameters must be determined individually by the customers for their applications.
|
||
