| Product -> AquaGard |
AquaGard 6004 |
||
| Application: Zero halogen FR compound for extrusion and injection molding. | ||
| Active Ingredients: Proprietary multi component system. | ||
| Carrier: Polyethylene (s). | ||
| Active Content: 45 wt.% | ||
| Physiology: The raw materials used comply with UL 94 fire and smoke regulations. VO @ 0.0625" (1/16"). | ||
| Physical Form: Off-White pellets (custom colors are available). | ||
Technical Data:
|
||
| Decomposition, Initial: Approximately 300° C. | ||
| Processing: Below 250° C. to achieve optimum flame retardant performance. | ||
| Flexural Modulus, Mpa (PSI) 10 (1450) | ||
| Elongation, % 120 ± 10 | ||
| Specific Gravity 1.05 to 1.1 | ||
| Shore - D Hardness 40 ± 2 | ||
| Oxygen Index 35 + | ||
| Recommended Processing Condition: | ||
| Extrusion and Injection Molding |
Avoid processing beyond 250° C melt temperature. | AquaGard 6004 can be blended into other resins (PE, PP) in a ratio of 7:3 (i.e 70 parts 6004 and 30 parts PE or PP). This ratio will impart flame retardancy, increase impact and improved elongation. |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
||
