| Product -> Clocell |
CLOCELL® 4004A |
||
| Application: Foaming of Polyolefins,
EVA, TPEs, etc. during extrusion and injection molding. 100% closed cells and smooth surface quality. |
||
| Active Ingredients: Proprietary multicomponent system. | ||
| Carrier: EVA | ||
| Active Content: > 40 WT. % | ||
| Physiology: The raw materials used comply with USFDA regulations. | ||
| Physical Form: White Pellets. | ||
Technical Data:
|
||
| T Start: Approximately 125° C. | ||
| T Max: 190° - 200°C | ||
| Processing: 150° - 170°C to achieve optimum gas yields. | ||
Recommended
Processing Condition: |
||
| Process | Use Levels* (WT%) |
Density Reduction (%) |
| Injection Molding | 5 - 9 | 20 - 40 |
| Extrusion | 5 - 8 | 20 - 40 |
| *The percentage usage for each application is only a recommendation based on our years of experience. The optimum percentages must be determined individually by the customers for their applications. | ||
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
||
