| Product -> FilmStat |
FilmStat 3K1 |
Product Description: |
| Antistat concentrate based on Ethoxylated tertiary amine in a LDPE carrier. Available in pelletized form in 50 lb. bags. |
Regulatory Information:
|
| The active ingredient is ethoxylated tertiary amine FilmStat 3KI meets FDA, Title 21, §178.3130(b) requirements for polyolefins at use levels of 0.2% by weight (0.1% of active antistatic agent) of polyolefin food contact films. Additionally, FilmStat 3KI is permitted under 21 CFR, §178.3130(b) "For use only as an antistatic agent at levels not to exceed 0.30% by weight in molded or extruded PE containers that contact food only of the types identified in 21 CFR, §176.170(c), Table 1, under Types 1, IV-B, VI-B, VII-B, VIII, under the conditions of use E through G described in table 2 of 21 CFR, §176.170(c), provided such foods have a pH above 5.0." |
Applications: |
| FilmStat 3KI is an effective antistat for low-density polyethylene film and sheet. It reduces the surface resistivity and static decay in extruded films and molded parts from PE. |
Use Level Recommendations:
|
| Typical use levels to range from 0.20 to 0.50% by weight of film and sheet grade PE resin. For injection or blow- molded articles, the recommended level is 0.3%. Due to the hygroscopic nature of antistatic agents, all Filmstat grades should be stored in a dry area. Open bags need to be closed and polyolefin/antistat blends should be protected from moisture and processed as soon as possible. |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
