| Product -> FlexPlast |
FlexPlast® 5007HF "For Extrusion Or Injection / Co-Injection Molding" |
||
| Application: Extrusion coating, wire & cable insulation. Also injection and co-injection molding ( gaskets, seals, soft-touch ). | ||
| Active Ingredients: Proprietary compound. | ||
| Carrier: TPE | ||
| Active Content:>40 wt.% | ||
| Shore - A Hardness: 30 to 40 | ||
| Specific Gravity: 1 to 1.2 | ||
| Physical Form: Translucent elastomeric pellets. | ||
Technical Data:
|
||
| Melting Point Greater than 175° C. | ||
| Processing: 190° to 230° C. | ||
Recommended
Processing Condition: |
||
| Extrusion and Injection Molding |
Smooth coating over plastic substrates or an insulation coating for wire & cable. Also can be injection or co-injection molded | This compound may be used as a neat material or may be blended with another compatible TPE, TPO, or thermoplastic material. |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
||
