Product -> GMS/FMA

GMS 2004 , 2004D
"PE Foam Stabilizer"
 
Application: Fine Foam cell Structure Stabilization of PE foam extrusions.
Active Ingredients: Proprietary compound.
Carrier: LDPE
GMS: 20 wt.%
Active Alpha-monoglyceride 10.5 %
Physical Form: White opaque solid pellets.
 
Technical Data:
Melting Point Greater than 100° C.
Processing: 150° to 210° C.
 
Recommended Processing Condition:
Foam Extrusion

Fine cell structure
stabilization of the
extruded foam PE using
Azo and/or physical
blowing agents.

 

 Use level is 2 to 10 wt.
% depending on the
application.
*Reduces static buildup on foam parts during and post extrusion.
Benefits:
  • Consistent feed as evidenced by constant screw amp level.
  • Extended shelf life of GMS, due to encapsulation in a hydrophobic proprietary additive.
  • Higher foam cell count per unit volume.
  • Smooth surface of the final foam article.
  • Controlled diffusion rate of the physical blowing agent.
  • Improved physical properties. (e.g. low shrinkage, improved compression strength).
  • GMS flake vs. GMS 2004 master batch: Most significant feature of GMS 2004 over that of any other GMS flake is improved hydrolytic stability. GMS flake , exposed to prolonged high temperatures and humidity, will hydrolyze to glycerin and stearic acid. This results in a reduction of the alpha-monglyceride content.
 

The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.


"from Concept to Completion...."