| Product ->PolyFoam |
PolyFoam 2004F |
| Application: Foaming of Polyolefins and styrenics during extrusion and injection molding. Fine closed cells and smooth surface quality. |
| Active Ingredients: Proprietary multiconponent endothermic
system. Carrier: LPDE |
| Active Content: 20 wt. % |
| Physiology: The raw materials used comply with USFDA . |
| Physical Form: White pellets. |
Technical Data: |
| Decomposition Initial: Approximately 150 ° C. |
| Processing: 190° to 230° C to achieve optimum gas yields. |
Recommended Processing Condition:
|
| Injection Molding: Weight reduction of the molded part-based on the geometry. 0.3 to 0.7 wt% |
| Extrusion: Gas assisted chemical foaming. 0.5 to 1 wt % |
| The above information is offered as true and accurate
to the best of our knowledge. This company makes no guarantee of results
and assumes no obligation or liability in connection with the same.
|
