| Product ->PolyFoam |
PolyFoam DC5 "Chemical Blowing Agent" |
| Application: Foaming of thermoplastics dielectric for CATV and high temperature cables. Fine closed cells and smooth surface quality. |
| Active Ingredients: Proprietary multicomponent endothermic system. |
| Carrier: LDPE |
| Active Content: 5 wt. % |
| Physiology: The raw materials used comply with USFDA . |
| Physical Form: White pellets. |
Technical Data: |
| Decomposition Initial: Approximately 150 ° C. |
| Processing: 190° to 230° C to achieve optimum gas yields. |
Recommended Processing Condition:
|
| Injection molding: Removal of sink marks 0.2 to 0.5 wt% |
| Weight reduction of the molded part - based on the geometry. 0.5 to 2.5 wt % |
| Sheet Extrusion: Nucleation in conjunction with environmentally friendly gasses. 0.3 to 0.7 wt. % |
| Extrusion - Cable Dielectric & Insulations Gas assisted chemical foaming 1 to 2 wt% |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
