| Product ->PolyGard |
PolyGard 3005R |
| Application: Substituted alkyl phosphate FR compound for non-woven and woven PP fiber. |
| Active Ingredients: Proprietary multicomponent system. |
| Carrier: Polypropylene |
| Active Content: 30 wt. % |
| Physiology: The raw materials used comply with NFPA 701 fire and smoke regulations. |
| Physical Form: White pellets. |
Technical Data: |
| Decomposition Initial: Approximately 300 ° C. |
| Processing: Below 250° to achieve optimum flame retardant performance |
| Flexural Modulus, Mpa (PSI) 10 (1450) |
| Elongation, % 120 ± 10 |
| Specific Gravity 1.1 to 1.3 |
| Shore-D Hardness 40 ± 2 |
Recommended Processing Condition:
|
| Fiber Extrusion Avoid processing beyond 250° C melt temperature. PolyGard 3005R can be blended into other PP resins in the ratio of 1:9 (i.e. 1 parts 3006R and 9 parts PP). This ratio will impart flame retardancy, increased impact and improved elongation. |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
