Product ->PolyOxyter

PolyOxyter® 1507, 2007 & 2507
"For Flexibility and Deep Draw Coatings"
 
Product Description:
These specialty alloys are developed for various performance enhancements for heat sensitive polyester concentrates, coatings and pigment dispersion application. These PolyOxyter® resins impart higher flexibility, even when cross-linked.
Available in solid form as pellets, PolyOxyter® 2507, 2007, and 1507 are soluble in a variety of coating solvents but exhibit lower solution viscosities than PolyOxyter® 2501 and 5001.
PolyOxyter® 2507, 2007 and 1507 contain more primary hydroxyl functionality. They cross-link with a variety of cross linkers to provide films with high chemical resistance without sacrificing mechanical properties, such as toughness, flexibility and durability.
Performance Advantages:

PolyOxyter® 2507, -2007, and -1507 offer a significant advantage in meeting the special needs of formable coatings for the rigid and flexible packaging industry, including:

  • Low solution viscosity .
  • Low glass transition temperature .
  • Improved flexibility, even when cross linked.
  • High formability.
  • Excellent chemical resistance when cross-linked.
 
Typical Properties:
Property(¹) PolyOxyter® 1507 PolyOxyter® 2007 PolyOxyter® 2507
Viscosity(²)
@ 25% NV, cP
1000
700
475
Tg C°
60
50
40
Gloss 60°
100
100
100
Crosshatch Adhesion, %
100
100
100
Reverse Impact,
In lbs.
>160
3H
3H
Pencil Hardness
3H
3H
3H
OT Bend
Pass
Pass
Pass
1) Film Thickness: 0.5 mil (12 microns) Bake: 400° F (204° C), (10 min air dry before bake) Substrate: Cold-rolled steel
2) In Cyclohexanone
 
Solubility:
Low solution viscosity Low glass transition temperature Improved flexibility, even when cross linked High formability Excellent chemical resistance when cross-linked PolyOxyter® resins are readily soluble in ester and ketone-like solvents. Aromatic hydrocarbon solvents can be used as diluents together with the primary solvents.
 

The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.


"from Concept to Completion...."