| Product ->PolyPurg |
PolyPurg - SC "Purging Compound For Colors & Corrosion Protection" |
||
| Application: Cleaning of extruders in color houses and in contaminant sensitive environments. Fast cycle times. Corrosion protection of extruders shaft and barrels. | ||
| Active Ingredients: Proprietary multicomponent system. | ||
| Carrier: TPR | ||
| Active Content: 100 wt. % | ||
| Physiology: The raw materials used comply with USFDA regulations. | ||
| Physical Form: Off-white pellets. | ||
Technical Data:
|
||
| Decomposition Initial: Approximately 150° C. | ||
| Processing: Appoximately150° C to about 150° C to achieve optimum cleaning performance. | ||
Recommended
Processing Conditions & Cycles: |
||
| Color Compounding Lines | Use PolyPurg - S. 100% | 45 min. cycle time with phthalos. 30 min. or less with other colors. |
| Extrusion - Injection, Pipe, Insulation, etc. |
Use PolyPurge - , 100% | 30 minutes. |
The above information is offered as true and accurate to the best of our knowledge. This company makes no guarantee of results and assumes no obligation or liability in connection with the same.
|
||
